Help center
Video

Video analytics

Read the numbers behind a match, from a quick drawer to full public match stats.

View as Markdown
On this page

Every video carries a stats layer alongside its clips and events — a fast Quick Stats drawer for a look while you work, and a full Match stats page when you need the whole picture. Both are recomputed live from the clips and events already loaded, and both are available on every plan, with no restriction.

A match's stats: scoreboard, the plays in the stats, KPI tiles and the split by period

Quick Stats drawer

Inside a video's workbench, open the More menu (⋯) in the toolbar and pick Stats (⌥S) to open a right-side drawer. It recalculates as you tag, and works even offline:

  • Live KPIs — clip count, duration, and other running totals
  • Tag distribution — how your clips break down by tag type
  • Head-to-head numbers — if your organization uses antagonist tag pairs (own-vs-rival pairings like Goal ↔ Goal conceded), the drawer shows the two sides against each other, each counting its own clips
  • Tagging-density timeline — where in the match your tagging activity is concentrated
  • Events by type — a breakdown of logged events alongside the clip stats

Because the drawer works from clips already loaded in the workbench, it's available even without a connection.

The Match stats page

For the full picture, open View stats on a video's card or row in the project's video list. This opens a dedicated page with a much deeper breakdown:

SectionWhat it shows
ScoreboardWin, draw, or loss at a glance
KPI tilesClip count, total and average duration, own/rival split, event count
By periodOwn vs. rival clips per period — halves, quarters or sets, one column per Period start marker logged in the match (or, failing that, per period of a The Bench import); the panel stays away when the match has neither
Momentum chartOwn minus rival activity over the course of the match
Player leaderboardRanks players by clips, minutes, events, and flags
Player profilePer-player tag breakdown for a selected player
Tag breakdownOwn vs. rival, with average duration per tag
Variant shareHow a tag's variants split out (e.g. Goal → Left foot / Right foot / Header)
Events by type and sidePlus a full event timeline
Build-up viewClips from just before a chosen event type — see what led into it
Workflow tilesManual vs. auto-tagged counts, untagged/unqualified counts, clips with drawings or notes, and a flagged-for-review count

Per player, and player vs player

Under the play picker, the Player row lists everyone with a clip or an event in the match. Pick one and the whole screen — numbers, momentum, tags, pitch map and exports — counts only that player's plays; Whole team goes back. Player vs player puts two side by side: clips, time on clips, events, reactions, own and rival plays, average height and advance, the share in the attacking third, each one's tags, and two heat maps with their average position. A play both are on counts for both. The report link does not change: it still counts every play in the catalog.

Get more out of this match

On a match with at least 10 clips, the stats screen can show a small block titled Get more out of this match. It lists only what the match lacks: "No clip has a zone", "No clip has a player" or "You did not mark the periods". Each line has How to, which opens the help for it, and Don't show again. Viewers do not see the block.

How momentum is calculated

The match is split into equal time windows — 30 seconds to 10 minutes each, sized so the strip has at most 40 bars. When the match has Period start markers the windows start at the first one and restart at each (the strip draws a break there); anything before kick-off is left out. In each window cliply measures how much of it is covered by your team's clips and how much by the opponent's — overlapping clips are merged, so a press and a goal tagged over the same attack count as one stretch of play, not two — and subtracts the two. A bar above the centre line means your team had more tagged play in that stretch; below it, the opponent did. Each window is blended with its neighbours (one part each, two for the window itself) so a single clip does not flip a bar, and bar height is relative to the widest gap in the same match, so two matches' strips are not on the same scale.

It measures tagged activity, not possession or danger, and it counts seconds of clip, not the number of clips. The side comes from each tag's answer to Who ends up with the ball?: a stretch where the answer is We do counts for your team, one where it is The opponent counts for the opponent, and Does not apply moves nothing. A Block is your play in the Own / Rival split and still counts against you here, because the opponent ends up with the ball. The tag's Impact no longer moves the strip. A tag nobody classified is left out; nothing is guessed from its name or its deck row. See How each tag counts in the stats. A clip's length is often the deck's pre/post roll rather than the play itself. Clips with no tag, and tags excluded from stats, are left out. If only one team has clips the strip says so, since every bar would point the same way. Tapping a bar filters the stats to what was playing in that window — a clip that starts before it and runs into it is included. The ? in the panel header repeats this on the report itself.

Advanced stats: per-match team table, sequences, the matrix and areas

The team's tags, match by match

Open a team's page (Teams, then the team) to find Season · tags: one row per tag, one column per match, oldest first, with the total, the average per match and the rate per 60'. Filter it by season and by opponent, click a cell to open that tag's first clip in that match, and export it as Excel or CSV. Only matches with at least one tagged clip are columns — an upload nobody analysed yet is not a column of zeros — and the table keeps the 20 most recent of them. A tag's side is its Whose play is it? answer. A tag that is Nobody's or unclassified is Neutral, shown under No team, and a tag excluded from stats is left out.

Sequences

Sequences answers "how often is A followed by B within N seconds". It is on the Match stats page, where it follows the tag filter and the momentum drill, and under the team's table, where it counts each match on its own and adds them up — a window never reaches from one match into the next.

  • Followed by — of every A, how many had a B within the window, the rate and the average gap, with a link to each case.
  • Not followed by — the A left without a B, so you can watch the presses that did not end in a recovery. An A too close to the end of the match (or of the drilled stretch) to tell is left out of both counts, and the panel says how many.
  • Add a step — A → B → C, each step within its own window of the one before.

Before you pick anything, the panel lists the pairs that happen most often.

The stats matrix

The Matrix crosses the rows you pick — tags and catalog events — with a dimension: Variant, Player, Zone, Period, Match (on the team page) or Side. Cross with splits each column by a second dimension (Player × Zone). Count in Count, % of row or Per 60'; per 60' by player uses each player's minutes on the field from thebench when every match has them, and the whole window otherwise. Cells are shaded as a heat map, a cell links to its first play, and the grid exports as Excel or CSV.

A new matrix starts on the window's five busiest tags. Save it by name and the whole organization can open it on any match or team; owners and admins can delete it. A row you picked stays in the grid at 0 when the window has none of it. A matrix cut by match opened on one match reads by player there, and saving keeps the match cut for the team page.

Searching a drawn area

When the deck has a zone map, the pitch map on the Match stats page lets you drag across the pitch to mark an Area: it counts the plays whose marked point falls inside, with the share of the pitch it covers. Plays with no marked point are left out, and the card says how many.

Publishing the stats publicly

Click Share stats on the Match stats page to create a shareable, public link — no login required to view it. It renders the identical stats for anyone who opens it: parents, press, or club management. This uses the same mechanism as Share links — see that article for details on link access and security.

Choosing what the stats include

Both Export and Share stats carry the same Include checklist: periods, tags, variants, events, the event timeline, zones, players and reactions. Untick a section and it is cut from the data itself, so every format leaves it out. The export remembers your pick in this browser. On a shared link the pick is saved with the link and applied on the server — what you leave out never reaches whoever opens it — and changing it updates the link already sent.

Both surfaces are open to everyone

Neither the Quick Stats drawer nor the Match stats page has a plan restriction — they're available from the Free plan up.

Support

Rather talk to a person?

If the guide isn't enough, message us on WhatsApp or by email. Someone on the team answers, no bots.